Is your Ipe hardwood deck starting to look dull and weathered? Constant exposure to weather and humidity can cause even the toughest Ipe wood decks to lose their natural sheen over time. The good news is that weathering affects only the surface of the Ipe hardwood decking, not the integrity of the wood — and with the right approach and some hands-on effort, you can absolutely bring your deck’s attractive hue back to life. Here are some effective ways to restore its timeless beauty and keep it looking impressive for years to come.

Clean your deck thoroughly

Ipe wood decks can become stained or discolored when there’s too much surface debris that can trap moisture, so be sure to remove any leaves and dirt as soon as possible. Using a garden hose or shop vacuum can make the job easier.

You can use a power washer if your deck has stubborn grime, but be careful! Keep the pressure under 1,200 psi and always test it first on a less visible section. Excessive pressure can scar or roughen the surface of Ipe hardwood decking, so use a wide fan nozzle to spread out the water force.

Deep clean with oxalic acid or a deck cleaner

Cleaning Ipe wood decks is easier with oxalic acid or a specially formulated commercial deck cleaner. With Oxalic acid, you can easily remove gray discoloration and brighten the surface. Just be sure to wear protective gear like a mask and gloves while handling it. Mixing ¼ to ½ cup per gallon of warm water is usually enough, but you can always check the manufacturer’s directions.

Here’s how to apply it:

  1. Pour the solution into a pump or backpack sprayer, then work in small sections to keep control.
  2. Ensure that the wood is always damp during application, as oxalic acid becomes less effective if you let it dry too fast.
  3. Are there stubborn spots? Lightly scrub them with a stiff-bristle brush.
  4. Let the solution sit for 10 to 15 minutes, but be sure to mist occasionally to prevent it from drying.
  5. With a garden hose, rinse the entire deck thoroughly until the water runs clear.
  6. Let it air dry completely before applying any finishing oil or sealer on your Ipe hardwood decking. This could take several hours to a full day.

Apply the finisher to protect and enhance your deck

Once your deck is clean and dry, it’s time to apply an Ipe oil finisher. This step is essential for protecting the Ipe wood decks and restoring their deep, natural color. A high-quality Ipe oil will help shield Ipe wood decking from moisture and UV rays, keeping it beautiful for years to come.

Follow these simple steps to apply it correctly:

  • Prepare the surface – Make sure the deck is completely dry and free from dust or debris.
  • Choose the right time – Pick a clear, dry day with no rain expected for at least 72 hours to allow proper curing.
  • Stir, don’t shake – Gently stir the oil before application to mix the ingredients evenly without creating bubbles.
  • Apply evenly – Use a large synthetic brush with a broom handle to spread the oil along the grain of each board for even coverage.
  • Let it soak in – Give the oil 15 to 30 minutes to penetrate the wood fibers fully.
  • Remove any excess – Wipe away or spread any puddles of oil to prevent uneven spots once it dries.
  • Enjoy the results – After drying, your Ipe deck will regain its rich tone and natural warmth, looking refreshed and protected.

Get more tips from our experts

At ABSWood, we specialize in premium-grade, FSC-certified Ipe wood decking materials designed for strength and long-lasting beauty. Our team can also provide personalized advice on restoring and maintaining Ipe wood decks to help you make the most of this exceptional hardwood.

When you’re ready to rejuvenate your deck, give us a call at 1-877-722-7473 (1-877-7ABSIPE) or 352-508-4990 to speak directly with our team. We’re ready to guide you in keeping your Ipe wood decking in top condition for years to come.